Tascam HS-P82 mobil multitrack recorder 8 input

Tascam HS-P82 mobil multitrack recorder 8 input

HS-P82 tilbyder otte spor af den højeste kvalitet. Den egner sig perfekt til filmproduktion og TV-lyd, med otte mikrofon-inputs. Hvert input tilbyder phantom-power og analog-limiting. Udover de otte spor har enheden også et stereo-mixdown som kan optages til brug under redigering. Lyd optages på et 192 kHz/24-bit WAV-format på et par CompactFlash-kort. HS-P82 tilbyder adskillige muligheder når det kommer til strømforsyningen. Den drives af enten AA eller NP-batterier, den inkluderede AC-adapter, det eksterne DC-input eller en V-mount adapter til Endura-batterier.

Recording media: CompactFlash card
  Tested media: SanDisk Extreme IV 4 GB, 8 GB, 16 GB, SanDisk Extreme 4 GB, 8 GB, 16 GB
File system: FAT32
File format: BWF (single-channel, multi-channel)
Number of audio channels: 8 channels at 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 8 channels + stereo mix at 44.1 kHZ, 48 kHz, 4 channels at 176.4 kHz, 192 kHz
Quantization bit rates: 16 bit/24 bit
Sampling frequencies: 44.1/47.952/48/48.048/88.2/96/176.4/192 kHz (47.952/48.048: 48 kHz ± 0.1% pull-up/pull-down)
Reference clock: Internal, Word in, Video in, Digital in (CH 1-2, CH 3-4, CH 5-6, CH 7-8)
Timecode frame rates: 23.976, 24, 25, 29.97 DF, 29.97 NDF, 30 DF, 30 NDF
Built-in mic: Omni directional, monaural
Low cut filter. Cut-off frequency: 40/80/120 Hz, Slope: –12/–18 dB/oct
MIC IN/LINE IN connectors (1–8): XLR-3-31 (1: GND, 2: HOT, 3: COLD)
  Input impedance (LINE). 10 kΩ
  Nominal input level (LINE): + 6 dBu (Ref. level: -9 dB), + 4 dBu (Ref. level: Other than –9 dB)
  Maximum input level (LINE): Selectable: +15 dBu, +18 dBu, +20 dBu, + 22 dBu, +24 dBu
  Input impedance (MIC –25): 2.4 kΩ
  Minimum input level (MIC –25): -45 dBu
  Maximum iput level (MIC –25): +11 dBu
  Input impedance (MIC 0): 2.4 kΩ
  Minimum input level (MIC 0): -70 dBu
  Maximum input level (MIC 0): -14 dBu
LINE OUT connectors (L/R): XLR-3-32 (1: GND, 2: HOT, 3: COLD)
  Output impedance: 100 Ω or less
  Nominal output level: +6 dBu (Ref. level: –9 dB)
  Nominal output level: +4 dBu (Ref. level: Other than –9 dB)
  Maximum output level: Selectable: +15 dBu, +18 dBu, +20 dBu, +22 dBu, +24 dBu
PHONES connector: 6.3-mm stereo phone jack
  Maximum output power: 100 mW + 100 mW or more (THD+N: 1 % or less, at 32 Ω)
DIGITAL I/O connector: D-Sub, 25-pin connector
  Format: AES3-2003/IEC60958-4 (AES/EBU)
  Minimum input voltage: 200 mVpp
  Maximum input voltage: 7 Vpp
  Output voltage: 3.5 Vpp
DIGITAL OUT connectors: BNC
  Format: AES3-2003/AES-3id-2001 (AES/EBU)
  Output voltage: 1 Vpp at 75 Ω
EXT DC IN connector: XLR-4-32 (1: –, 2: NC, 3: NC, 4: +)
  Input voltage: 11–16 V (2 A)
CASCADE/WORD/VIDEO IN connector: BNC
  Input voltage: 5 V TTL equivalent
  Input impedance: 75 Ω ±10 %
  Allowable frequency deviation of external sync: ±100 ppm
CASCADE/WORD OUT connector: BNC
  Output voltage: 5 V TTL equivalent
  Output impedance: 75 Ω ±10 %
  Sampling frequencies. 44.1/47.952/48/48.048/88.2/96/176.4/192 kHz (47.952/48.048: 48 kHz ± 0.1 % pull-up/pull-down)
TIME CODE IN connector: BNC
  Input voltage. 0.5–5 Vpp
  Input impedance: 10 kΩ
TIME CODE OUT connector: BNC
  Output voltage: 2.0 Vpp
  Output impedance: 600 Ω
USB port: USB B-type, 4-pin
  Format: USB2.0 HIGH SPEED (480 MBit/s)
KEYBOARD connector: Mini-DIN connector (PS/2)
Frequency response (MIC/LINE IN to LINE OUT)
  All sample rates: 20 Hz – 20 kHz, 0 dB (±0.5 dB)
  88.2/96 kHz sample rates: at 40 kHz –1 dB (±1.0 dB)
  176.4/192 kHz sample rates: at 80 kHz –3 dB (+1/–2 dB)
Distortion
  LINE IN to LINE OUT: 0.003 % or less (–20 dB reference level, +23 dBu input, 1 kHz, AES-17 LPF)
  MIC IN (MIC –25) to LINE OUT: 0.02 % or less (–20 dB reference level, –10 dBu input, Trim at +20 dB, 1 kHz, AES-17 LPF)
  MIC IN (MIC 0) to LINE OUT: 0.02 % or less (–20 dB reference level, –35 dBu input, Trim at +20 dB, 1 kHz, AES-17 LPF)
S/N ratio
  LINE IN to LINE OUT: 110 dB(A) or more (22 kHz LPF)
  MIC IN (MIC –25 or MIC 0) to LINE OUT: 100 dB(A) or more (22 kHz LPF)
Windows: Windows XP, Windows Vista, Windows 7
  CPU: Pentium 300 MHz or faster
  Memory: 128 MB or more
  USB: USB 2.0 port
Mac: Mac OS X 10.2 or later
  CPU: Power PC G3, G4, Intel Mac 266 MHz or faster
  Memory: 64 MB or more
  USB: USB 2.0 port
Recommended USB host controller: Intel chipset
Power requirements: 100–240 V AC, 50–60 Hz (AC adaptor PS-1225L) 10 AA batteries (Alkaline or NiMH) External DC battery (DC 11–16 V, 2 A or more)
Battery operation time (continuous operation): Measured according to JEITA standard at 48 kHz, 24-bit, 8 ch playback or recording, phantom power off. Varies with operating conditions.
  NP type battery (Li-Ion: 14.8 V/4.6 Ah): About 5 hours
  AA type batteries (NiMH): About 2 hours
Power consumption: 18 W
Dimensions (W x H x D): 270 x 100 x 260 mm (excluding protrusions)
Weight: 3.65 kg (excluding batteries)
Operating temperature range: 0–40 ºC