Redshopb2b

  • Fostex AR-501 batteridrevet mikrofon forforstærker
  • Fostex AR-501 batteridrevet mikrofon forforstærker
  • Fostex AR-501 batteridrevet mikrofon forforstærker
  • Fostex AR-501 batteridrevet mikrofon forforstærker
  • Fostex AR-501 batteridrevet mikrofon forforstærker
  • Fostex AR-501 batteridrevet mikrofon forforstærker
  • Fostex AR-501 batteridrevet mikrofon forforstærker
  • Fostex AR-501 batteridrevet mikrofon forforstærker
  • Fostex AR-501 batteridrevet mikrofon forforstærker
  • Fostex AR-501 batteridrevet mikrofon forforstærker
Fostex
Varenummer: F-AR501 - EAN:
4995090304465

Fostex AR-501 batteridrevet mikrofon forforstærker

Levering: 1-3 dage

Kort beskrivelse

Professionel mikrofon preamp, forsynet med 1x AA batteri Letvægt, kompakt aluminium kabinet 48V phantom Egnet til DSLR Kamera, Camcorder, Line Mixer, Audio Interface etc. for ENG, sports relays, location recording & installations.
Detaljebeskrivelse
Inkl. moms DKK 3.095,00

Detaljebeskrivelse

Fostex AR-501 Mic preamplifier til batterier eller 5V DC

AR501-modellen er en batteriforsynet mikrofon-preamplifier af professionel kvalitet, huset i et kompakt, letvægts- og robust aluminiumskabinet. AR501'en tilbyder 48V phantom-power, i kombination med DSLR-kamera, videokamera, Line-Mixer, Audio-Interface etc. lokationsoptagelse og installation.

Analog Input
Connector: XLR-3-31, electrically balanced, 2-Hot
LINE: Input reference level +4dBu
Maximum input level +24dBu
MIC: Input reference level -60 /-45/-30/-20dBu
Maximum input level 0dBu
Phantom Power: DC48V +/-4V (10mA)
(DC24V in energy saving mode)

Analog Output
Balanced Connector:   
XLR-3-32, electrically balanced, 2-Hot
Input impedance: 10k ohm or more
Reference output Level +4dBu
Maximum output level +24dBu (+20dBu in energy saving mode)

Unbalanced Connector:   
3.5mm dia stereo mini jack
Reference output level -10dBV (ATT ON: -50dBV)
Maximum output level +10dBV (ATT ON: -30dBV)

High Pass Filter Cutoff 80Hz / 160Hz switchable, -6dB/oct.
Frequency Response 20-20kHz +/-1dB (between MIC In – Out, reference level, Gain Low)
20-20kHz +/-3dB (between MIC in – Out, reference level, Gain Hi)

Signal to Noise Ratio 60dB or higher (Gain Hi)
T.H.D. less than 0.1% (1kHz, Gain Hi)

Measurements: 42.8(W) x 31.6(H) x 116(D) mm
Weight: approx. 110g (150g including AA battery)
Power: 1 x AA battery (Alkaline or Ni-MH) / DC-IN (+5V)
Power consumption maximum 0.6W
Accessories:1 x stereo mini cable (ET-C0.2), 1 x joint plate

- Selectable mic input gain level, -20 / -30 / -45 / -60dBu
- Phantom 48V power supply
- HPF at 80 or 160Hz with -6dB/oct
- Cascading function for stereo application with a supplied dedicated joint plate
- Balanced Out (+4dBu, XLR) and Unbalanced Out (-10dBV or attenuated -50dBV, stereo mini)
- Peak LED and Power LED that doubles with low battery warning
- Powered by 1 x AA battery (Alc or NiMH) for 10 hours operation (approx. 4 hours with P48V on) or DC-IN (5V, Micro USB)
- Power saving mode (phantom power down to 24V) to extend the operation hours
- Extruded aluminum chassis for light weight but robust construction
- Shoe rails for various camera rigs and a tri-pod compatible screw hole
- ET-C0.2, stereo mini OFC cable included for DSLR connection or cascading to another unit

Relaterede produkter